Search Results

Search found 30514 results on 1221 pages for '10 04'.

Page 177/1221 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• Can't figure out error in Cisco ASA log "regular translation creation failed for icmp ..."

  - by Martijn Heemels

  Every few seconds our new Cisco ASA 5505 firewall is logging errors that I can't figure out with my limited Cisco experience. Severity Date Time Syslog ID Source IP Destination IP Description 3 Mar 25 2010 17:21:14 305006 8.8.8.8 regular translation creation failed for icmp src inside:10.10.0.200 dst outside:8.8.8.8 (type 3, code 3) 3 Mar 25 2010 17:18:37 305006 8.8.4.4 regular translation creation failed for icmp src inside:10.10.0.200 dst outside:8.8.4.4 (type 3, code 3) The logged inside IP is our internal DNS resolver, and the outside IP's are Google's public DNS servers. ICMP Type 3 Code 3 means "Port Unreachable" Our "outside" interface has a fixed IP and our "inside" interface is in the 10.10.0.0/16 subnet. The 'Inspect DNS' Service Policy is enabled, with the preset DNS inspection map. Furthermore there's an ACL that allows all inbound ICMP on the "outside" interface. I've spent hours trying to figure this one out, so any and all advice is welcome!

  Read the article

• VPN iptables Forwarding: Net-to-net

  - by Mike Holler

  I've tried to look elsewhere on this site but I couldn't find anything matching this problem. Right now I have an ipsec tunnel open between our local network and a remote network. Currently, the local box running Openswan ipsec with the tunnel open can ping the remote ipsec box and any of the other computers in the remote network. When logged into on of the remote computers, I can ping any box in our local network. That's what works, this is what doesn't: I can't ping any of the remote computers via a local machine that is not the ipsec box. Here's a diagram of our network: [local ipsec box] ----------\ \ [arbitrary local computer] --[local gateway/router] -- [internet] -- [remote ipsec box] -- [arbitrary remote computer] The local ipsec box and the arbitrary local computer have no direct contact, instead they communicate through the gateway/router. The router has been set up to forward requests from local computers for the remote subnet to the ipsec box. This works. The problem is the ipsec box doesn't forward anything. Whenever an arbitrary local computer pings something on the remote subnet, this is the response: [user@localhost ~]# ping 172.16.53.12 PING 172.16.53.12 (172.16.53.12) 56(84) bytes of data. From 10.31.14.16 icmp_seq=1 Destination Host Prohibited From 10.31.14.16 icmp_seq=2 Destination Host Prohibited From 10.31.14.16 icmp_seq=3 Destination Host Prohibited Here's the traceroute: [root@localhost ~]# traceroute 172.16.53.12 traceroute to 172.16.53.12 (172.16.53.12), 30 hops max, 60 byte packets 1 router.address.net (10.31.14.1) 0.374 ms 0.566 ms 0.651 ms 2 10.31.14.16 (10.31.14.16) 2.068 ms 2.081 ms 2.100 ms 3 10.31.14.16 (10.31.14.16) 2.132 ms !X 2.272 ms !X 2.312 ms !X That's the IP for our ipsec box it's reaching, but it's not being forwarded. On the IPSec box I have enabled IP Forwarding in /etc/sysctl.conf net.ipv4.ip_forward = 1 And I have tried to set up IPTables to forward: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [759:71213] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 25 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 500 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 4500 -j ACCEPT -A INPUT -m policy --dir in --pol ipsec -j ACCEPT -A INPUT -p esp -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -s 10.31.14.0/24 -d 172.16.53.0/24 -j ACCEPT -A FORWARD -m policy --dir in --pol ipsec -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT Am I missing a rule in IPTables? Is there something I forgot? NOTE: All the machines are running CentOS 6.x Edit: Note 2: eth1 is the only network interface on the local ipsec box.

  Read the article

• Error when reloading supervisord: unix:///tmp/supervisor.sock no such file

  - by Yarin

  I'm running supervisord on my CentOS 6 box like so, /usr/bin/supervisord -c /etc/supervisord.conf and when I launch supervisorctl all process status are fine, but if I try to reload using supervisorctl I get unix:///tmp/supervisor.sock no such file I'm using the same config file I've used successfully on other boxes, and im running everything as root. I can't undesrtand what the problem is... Config file: ; Sample supervisor config file. [unix_http_server] file=/tmp/supervisor.sock ; (the path to the socket file) ;chmod=0700 ; socket file mode (default 0700) ;chown=nobody:nogroup ; socket file uid:gid owner ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) ;[inet_http_server] ; inet (TCP) server disabled by default ;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface) ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) [supervisord] logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10 ; (num of main logfile rotation backups;default 10) loglevel=info ; (log level;default info; others: debug,warn,trace) pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) ;umask=022 ; (process file creation umask;default 022) ;user=chrism ; (default is current user, required if root) ;identifier=supervisor ; (supervisord identifier, default is 'supervisor') ;directory=/tmp ; (default is not to cd during start) ;nocleanup=true ; (don't clean up tempfiles at start;default false) ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP) ;environment=KEY=value ; (key value pairs to add to environment) ;strip_ansi=false ; (strip ansi escape codes in logs; def. false) ; the below section must remain in the config file for RPC ; (supervisorctl/web interface) to work, additional interfaces may be ; added by defining them in separate rpcinterface: sections [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL for a unix socket ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket ;username=chris ; should be same as http_username if set ;password=123 ; should be same as http_password if set ;prompt=mysupervisor ; cmd line prompt (default "supervisor") ;history_file=~/.sc_history ; use readline history if available ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor. ;[program:foo] ;command=/bin/cat [program:embed_scheduler] command=/opt/web-apps/mywebsite/custom_process.py process_name=%(program_name)s_%(process_num)d numprocs=3 ;[program:theprogramname] ;command=/bin/cat ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=999 ; the relative start priority (default 999) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10) ;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions (def no adds) ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample eventlistener section shows all possible ; eventlistener subsection values, create one or more 'real' ; eventlistener: sections to be able to handle event notifications ; sent by supervisor. ;[eventlistener:theeventlistenername] ;command=/bin/eventlistener ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;events=EVENT ; event notif. types to subscribe to (req'd) ;buffer_size=10 ; event buffer queue size (default 10) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=-1 ; the relative start priority (default -1) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups ; # of stderr logfile backups (default 10) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample group section shows all possible group values, ; create one or more 'real' group: sections to create "heterogeneous" ; process groups. ;[group:thegroupname] ;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions ;priority=999 ; the relative start priority (default 999) ; The [include] section can just contain the "files" setting. This ; setting can list multiple files (separated by whitespace or ; newlines). It can also contain wildcards. The filenames are ; interpreted as relative to this file. Included files *cannot* ; include files themselves. ;[include] ;files = relative/directory/*.ini

  Read the article

• Route additional network through Sonicwall site-to-site VPN

  - by Brandon

  I have a sonicwall site to site vpn. At one of the sites there is another Cisco vpn to another site. I need to route the traffic for the cisco vpn through the site to site from the other sonicwall site. Site A - 10.10.0.0 /16 network Site B - 192.168.1.0 /24 Sonicwall, A cisco vpn is on 192.168.1.226 address and has routes the 10.10.0.0 network to Site A. Site C - 192.168.2.0 /24 Sonicwall Site A-B VPN is working Site B-C VPN is working I need to get Site C to transmit the 10.10.0.0 traffic over the VPN to site B and then out the Cisco device.

  Read the article

• Poor home office network performance and cannot figure out where the issue is

  - by Jeff Willener

  This is the most bizarre issue. I have worked with small to mid size networks for quite a long time and can say I'm comfortable connecting hardware. Where you will start to lose me is with managed switches and firewalls. To start, let me describe my network (sigh, shouldn't but I MUST solve this). 1) Comcast Cable Internet 2) Motorola SURFboard eXtreme Cable Modem. a) Model: SB6120 b) DOCSIS 3.0 and 2.0 support c) IPv4 and IPv6 support 3-A) Cisco Small Business RV220W Wireless N Firewall a) Latest firmware b) Model: RV220W-A-K9-NA c) WAN Port to Modem (2) d) vlan 1: work e) vlan 2: everything else. 3-B) D-Link DIR-615 Draft 802.11 N Wireless Router a) Latest firmware b) WAN Port to Modem (2) 4) Servers connected directly to firewall a) If firewall 3-A, then vlan 1 b) CAT5e patch cables c) Dell PowerEdge 1400SC w/ 10/100 integrated NIC (Domain Controller, DNS, former DHCP) d) Dell PowerEdge 400SC w/ 10/100/1000 integrated NIC (VMWare Server) 4) Linksys EZXS88W unmanaged Workgroup 10/100 Switch a) If firewall 3-A, then vlan 2 b) 25' CAT5e patch cable to firewall (3-A or 3-B) c) Connects xBox 360, Blu-Ray player, PC at TV 5) Office equipment connected directly to firewall a) If firewall 3-A, then vlan 1 b) ~80' CAT6 or CAT5e patch cable to firewall (3-A or 3-B) c) Connects 1) Dell Latitude laptop 10/100/1000 2) Dell Inspiron laptop 10/100 3) Dell Workstation 10/100/1000 (Pristine host, VMWare Workstation 7.x with many bridged VM's) 4) Brother Laser Printer 10/100 5) Epson All-In-One Workforce 310 10/100 5-A) NetGear FS116 unmanaged 10/100 switch a) I've had this switch for a long time and never had issues. 5-B) NetGear GS108 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-C) Linksys SE2500 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-D) TP-Link TL-SG10008D unmanaged 10/100/1000 a) Bought new for this issue and still have. 6) VLan 1 Wireless Connections (on same subnet if 3-B) a) Any of those at 5c b) HP Laptop 7) VLan 2 Wireless Connection (on same subnet if 3-B) a) IPad, IPod b) Compaq Laptop c) Epson Wireless Printer Shew, without hosting a diagram I hope that paints a good picture. The Issue The breakdown here is at item 5. No matter what I do I cannot have a switch at 5 and have to run everything wireless regardless of router. Issues related to using a switch (point 5 above) SpeedTest is good. Poor throughput to other devices if can communicate at all. Usually cannot ping other devices even on the same switch although, when able, ping times are good. Eventual lose of connectivity and can "sometimes" be restored by unplugging everything for several days, not minutes or hours but we're talking a week if at all. Directly connect to computer gives good internet connection however throughput to other devices connected to firewall is at best horrible. Yet printing doesn't seem to be an issue as long as they are connected via wireless. I have to force the RV220W to 1000Mb on the respective port if using a Gig Switch Issues related to using wireless in place of a switch (point 5 above) Poor throughput to other devices if can communicate. SpeedTest is good. Bottom line Internet speeds are awesome. By the way, Comcast went WAY above and beyond to make sure it was not them. They rewired EVERYTHING which did solve internet drops. Computer to computer connections are garbage Cannot get switch at 5 to work, yet other at 4 has never had an issue. Direct connection, bypass switch, is good for DHCP and internet. DNS must be on server, not firewall. Cisco insists its my switches but as you can see I have used four and two different cables with the same result. My gut feeling is something is happening with routing. But I'm not smart enough to know that answer. I run a lot of VM's at 5-c-3, could that cause it? What's different compared to my previous house is I have introduced Gigabit hardware (firewall/switches/computers). Some of my computers might have IPv6 turned on if I haven't turned it off already. I'm truly at a loss and hope anyone has some crazy idea how to solve this. Bottom line, I need a switch in my office behind the firewall. I've changed everything. The real crux is I will find a working solution and, again, after days it will stop working. So this means I cannot isolate if its a computer since I have to use them. Oh and a solution is not throwing more money at this. I'm well into $1k already. Yah, lame.

  Read the article

• Forwarding MySQL connection with iptables and differents network interfaces

  - by Emilio Nicolás

  I have a PC with Ubuntu as a router. It has a 3G connection with a public IP to the Internet, and there is a private wireless subnet. So it has two active interfaces: ppp0: public IP (WAN) wlan0: private IP (LAN) With iptables I wannt to forward every MySQL connection (port 3306) to a local machine (10.42.43.10) of the subnet. I type these iptables commands: iptables -A PREROUTING -t nat -i ppp0 -p tcp --dport 3306 -j DNAT --to 10.42.43.10:3306 iptables -A FORWARD -p tcp -i ppp0 -o wlan0 -d 10.42.43.10 --dport 3306 -j ACCEPT But it doesn't work. telnet publicip 3306 fails :-( Any help will be appreciated. Thanks!

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• Issues getting a Cisco WLC 5508 to find AIR-LAP1142N

  - by user95917

  hoping someone can help me with a problem here. I'm attempting to setup a test (loan from Cisco) wireless network. Here's what i've got/done: 5508 Controller - Service Port IP set to 10.74.5.2 /24. Management IP set to 10.74.6.2 /24 with a default gateway of 10.74.6.1. Virtual IP set to 1.1.1.1. Copper SFP in slot 7, CAT5 (known good) going from there to port 1/0/47 on the switch. Green lights on both ends. 2960-S Switch - Vlan1 - 10.74.6.1 /24. dhcp pool 10.74.6.0 /24, default router 10.74.6.1. excluded-address 10.74.6.1, 10.74.6.2. 1/0/4 on the switch is set to switchport mode access and no shut. 1/0/47 on the switch is setup to switchport mode trunk and no shut. 1/0/4 has a CAT5 (known good) cable going from there to the AP. When I do a sh cdp nei from the switch, i can see the AP and Controller listed. When i configure my PC's nic to 10.74.5.5, and plug a cable from my nic to the SP port on the controller i can get on the device via the gui. In there, the only errors/info that show up in the trap are: Link Up: Slot: 0 Port: 7 Controller time base status - Controller is out of sync with the central timebase. I've manually set the time but apparently that's not quite the problem (or at least not the entire problem). When i plug the AP in, i see on the switch console that it grants it power, it sees it connect...but the controller won't see it for some reason. From what i've read you shouldn't have to do anything to the AP as it's managed by the controller...but i'm not sure what setting I'm missing for it to work. The AP light on top is continually cycling green, red, yellow. When I first start it up, it blinks green for 20 or so seconds, then goes to solid green for another 20 seconds or so, then flashes blue, green, red for awhile...but always ends up goinn back to the standard, green, red, yellow. Does anyone see any obvious issues with my setup or have any suggestions as to why i might be having a problem? Thanks for your help!

  Read the article

• Prefix files with the current directory name using Powershell

  - by XST

  I have folders with images (*.png and *.jpg) >C:\Directory\Folder1 01.png 02.png 03.jpg 04.jpg 05.png And I want to rename all the files like this using powershell: >C:\Directory\Folder1 Folder1 - 01.png Folder1 - 02.png Folder1 - 03.jpg Folder1 - 04.jpg Folder1 - 05.png So I came up with this simple line: Get-ChildItem | Where-Object { $_.Extension -eq ".jpg" -or $_.Extension -eq ".png"} | rename-item -newname {$_.Directory.Name +" - " + $_.Name} If I have 35 or less files in the folder, I will have the wanted result, but if there is 36 or more files, I will end up with this: >C:\Directory\Folder1 Folder1Folder1Folder1 - 01.png Folder1Folder1Folder1 - 02.png Folder1Folder1Folder1 - 03.jpg Folder1Folder1Folder1 - 04.jpg Folder1Folder1Folder1 - 05.png The loop stops when the file's name exceeds 248 characters. Any ideas why it's looping?

  Read the article

• Network wide rule to forwared IP address

  - by Patrick

  Hi, we have a virtual machine which hosts a web based bug tracker in our network which is reached internally via e.g. 192.168.1.5:9800. From the outside we made a port forwarding in our firewall so that the web site can be reached via e.g. 72.10.10.10:9800. Now that works fine but the problem is that we got different IP addresses to reach the same service depending if we are in the office or at home and when the service sends out an email the link doesn't always work :) So we are looking for a solution to fix it. One could be to make a rule in out firewall that all communication to 72.10.10.10:9800 is forwarded to 192.168.1.5:9800... If that's possible that is considering it's an IP address + a port. The reason we used a port is because we only got one static public IP address but multiple virtual web appliances. Thanks for any suggestions or solutions :) Patrick PS: The network is a Win 2008 R2 domain by the way

  Read the article

• How to create an alias for linux server name?

  - by Radek

  The openSUSE server name is 'darkhelmet'. I want to create an alias 'dh' for it. So I can also type 'ssh dh' and 'http://dh' would work too. What file/files and where do I have to edit to make this happen? Extract from /etc/hosts from darkhelmet 127.0.0.1 localhost # special IPv6 addresses ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 127.0.0.2 darkhelmet.edumate darkhelmet 10.0.0.22 db2workgroup db2workgroup [root][skroob] nslookup darkhelmet Server: 10.0.0.10 Address: 10.0.0.10#53 Name: darkhelmet.edumate Address: 10.0.0.22

  Read the article

• pound: multiple domains

  - by niklassaers

  Hi guys, I've been using pound to run mydomain.dk. Now I've bought some other domains and SSL certificates that are mydomain.no, mydomain.se and mydomain.eu. My old config looked roughly like this: ListenHTTPS Address 81.19.246.120 Port 443 Cert "/usr/local/etc/pound.keys/mydomain.dk.pem" Service BackEnd Address 10.0.10.10 Port 8080 End End End At places like here I've seen that I can use HeadRequire in the Service part, but I want the Host header to go together with the Cert, ideally something like ListenHTTPS Address 81.19.246.120 Port 443 HostAndCert "mydomain.dk" "/usr/local/etc/pound.keys/mydomain.dk.pem" HostAndCert "mydomain.se" "/usr/local/etc/pound.keys/mydomain.se.pem" HostAndCert "mydomain.no" "/usr/local/etc/pound.keys/mydomain.no.pem" HostAndCert "mydomain.eu" "/usr/local/etc/pound.keys/mydomain.eu.pem" Service BackEnd Address 10.0.10.10 Port 8080 End End End Any suggestions or clues to how I can accomplish this? Cheers Nik

  Read the article

• Windows XP long login (15 minutes +)

  - by Emily Pinkerton

  I'm having a lot of issues with our Windows XP SP3 machines (about 5, but every week another gets on the bandwagon of this issue). They take forever (15 minutes) to apply the user settings once our employee's enter their username and password to login to our domain. It only happens say if a user has reboot the machine and then when they go to log back in then it hangs forever. Reboot and restart are the key words for sure I've noticed with this issue. Here are things I have tested: •Made sure the DNS was set to point to our two servers (Server01 & Server02 are DNS Domain Controllers, 01 is primary and 02 backup). •No major changes have been applied to our network. •All profiles are local, so I have deleted out local profiles that aren't being used on those machines that run slow. •Also I have tried to enable and disable the Enable Fast Login under the local machines GP. It was not configured originally and when I tested both, it made the computer hang on "applying computer settings" for about 15 minutes. When it finally came up to the login screen the it was very quick to login to the domain. However this doesn't fix my issue, and even more frustrating upon setting it back to being not configured it now still takes for forever to apply computer settings. •I enabled the userenv log and here is what I see, but my experience is limited and I'm not sure how to read it exactly. (see below for log, this isn't the whole thing because it's really long) USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: LoadUserProfileP succeeded USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: Returning success. Final Information follows: USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-UserName = USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-lpProfilePath = < USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-dwFlags = 0x0 USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: Returning TRUE. hProfile = <0x818 USERENV(2ec.2f0) 10:50:41:984 IsSyncForegroundPolicyRefresh: Synchronous, Reason:NonCachedCredentials USERENV(2ec.248) 10:50:41:984 IsSyncForegroundPolicyRefresh: Synchronous, Reason:NonCachedCredentials USERENV(3c4.3dc) 10:51:26:166 LibMain: Process Name: C:\WINDOWS\system\wbem\wmiprvse.exe USERENV(2ec.5cc) 11:05:08:741 ProcessGPOs: network name is 192.168.49.0 USERENV(4a8.888) 11:05:08:804 GetProfileType: Profile already loaded. USERENV(4a8.888) 11:05:08:804 LoadProfileInfo: Failed to query central profile with error 2 USERENV(4a8.888) 11:05:08:804 GetProfileType: ProfileFlags is 0 Also this error is in the file quite a lot: USERENV(328.5bc) 11:05:29:733 GetUserDNSDomainName: Failed to impersonate user USERENV(328.834) 11:05:29:733 ImpersonateUser: Failed to impersonate user with 5. I'm really not sure what else to do with my limited experience, but I'm hoping someone can help me. I feel like I'm dealing with an issue way above my level and any knowledge I can gain out of getting this issue fixed would be amazing.

  Read the article

• Dedicated server not responding. Malicious?

  - by user2801881

  My Dedicated server dies for days on end. As soon as i reboot after about 20 seconds it does again. Then it will just work again and be fine for another week or so. Im convinced its malicious. Not sure what results or readings i can give you so just ask and i will do whatever is needed. netstat (top 20 connections) 7 79.142.88.250 8 120.202.249.19 8 159.226.21.62 8 188.168.38.102 8 202.114.6.37 8 222.62.207.70 9 60.191.35.42 10 112.124.46.186 10 116.228.55.184 10 181.133.218.11 10 222.90.111.146 11 183.136.146.110 12 124.127.51.135 12 92.225.24.24 13 221.176.23.242 15 119.10.115.165 16 17 218.6.224.66 21 116.228.55.217 24 114.112.194.19 top CPU usage seems to add up to about 10% Mailq is empty Thanks in advance

  Read the article

• qpid-cpp-client won't update through yum

  - by alexus

  somewhere around last week I received a notification for update, so I've tried "yum update" and that's what I'm getting... [alexus@wcmisdlin02 ~]$ sudo yum update Loaded plugins: refresh-packagekit Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package qpid-cpp-client.x86_64 0:0.10-3.el6 will be updated --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-service-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-host-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-net-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-service-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-host-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-net-0.4.0-5.el6.x86_64 ---> Package qpid-cpp-client.x86_64 0:0.14-22.el6_3 will be an update ---> Package qpid-cpp-client-ssl.x86_64 0:0.10-3.el6 will be updated ---> Package qpid-cpp-client-ssl.x86_64 0:0.14-22.el6_3 will be an update ---> Package qpid-qmf.x86_64 0:0.10-6.el6 will be updated ---> Package qpid-qmf.x86_64 0:0.14-14.el6_3 will be an update --> Finished Dependency Resolution Error: Package: matahari-net-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-net-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-service-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-service-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-host-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-host-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest [alexus@wcmisdlin02 ~]$ any ideas?

  Read the article

• installing Gevent on OSX

  - by Dev9281

  >>> import gevent Traceback (most recent call last): File "<stdin>", line 1, in <module> File "build/bdist.macosx-10.6-universal/egg/gevent/__init__.py", line 41, in <module> File "build/bdist.macosx-10.6-universal/egg/gevent/core.py", line 7, in <module> File "build/bdist.macosx-10.6-universal/egg/gevent/core.py", line 6, in __bootstrap__ ImportError: dlopen(/Users/admin/.python-eggs/gevent-0.13.6-py2.6-macosx-10.6-universal.egg-tmp/gevent/core.so, 2): Symbol not found: _event_global_current_base_ Referenced from: /Users/admin/.python-eggs/gevent-0.13.6-py2.6-macosx-10.6-universal.egg-tmp/gevent/core.so Expected in: flat namespace in /Users/admin/.python-eggs/gevent-0.13.6-py2.6-macosx-10.6-universal.egg-tmp/gevent/core.so What's this about? I did not get any errors during the installation

  Read the article

• Troubleshooting MySQL : can connect to localhost but not to 127.0.0.1 or IP

  - by mireille raad

  Hello, I'd appreciate some help on this, it is bit tricky to find the correct keywords to google :) Using PHP i am able to connect using the following connection string : $link = mysql_connect('localhost', 'wlek' , 'wlek'); but when i use 127.0.0.1 or 10.10.40.15 (self-IP), i am getting connection failed Could not connect: Can't connect to MySQL server on '10.10.40.15' (13) I used yum install mysql , yum install php yum install php-mysql 1 - is there anything more i should install for php ? 2 - any troubleshooting tips ? 3 - what keywords, links do u recommend | % | mir | xdb | | 10.10.40.15 | mir | xdb | | localhost | mir | xdb | [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql port=3306 bind-address=0.0.0.0 old_passwords=1 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid ~ appreciate it :)

  Read the article

• libpam-ldapd not looking for secondary groups

  - by Jorge Suárez de Lis

  I'm migrating from libpam-ldap to libpam-ldapd. I'm having some trouble gathering the secondary groups from LDAP. On libpam-ldap, I had this on the /etc/ldap.conf file: nss_schema rfc2307bis nss_base_passwd ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es nss_base_shadow ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es nss_base_group ou=Groups,ou=CITIUS,dc=inv,dc=usc,dc=es nss_map_attribute uniqueMember member The mapping is there because I'm using groupOfNames instead of groupOfUniqueNames LDAP class for groups, so the attribute naming the members is named member instead of uniqueMember. Now, I want to do the same using libpam-ldapd but I can't get it to work. Here's the relevant part of my /etc/nslcd.conf: base passwd ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es base shadow ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es base group ou=Groups,ou=CITIUS,dc=inv,dc=usc,dc=es map group uniqueMember member And this is the debug output from nslcd, when a user is authenticated: nslcd: [8b4567] DEBUG: connection from pid=12090 uid=0 gid=0 nslcd: [8b4567] DEBUG: nslcd_passwd_byuid(4004) nslcd: [8b4567] DEBUG: myldap_search(base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(&(objectClass=posixAccount)(uidNumber=4004))") nslcd: [8b4567] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [8b4567] DEBUG: ldap_set_rebind_proc() nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [8b4567] DEBUG: ldap_simple_bind_s("uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [8b4567] connected to LDAP server ldap://172.16.54.31/ nslcd: [8b4567] DEBUG: ldap_result(): end of results nslcd: [7b23c6] DEBUG: connection from pid=15906 uid=0 gid=2000 nslcd: [7b23c6] DEBUG: nslcd_pam_authc("jorge.suarez","","su","***") nslcd: [7b23c6] DEBUG: myldap_search(base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(&(objectClass=posixAccount)(uid=jorge.suarez))") nslcd: [7b23c6] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [7b23c6] DEBUG: ldap_set_rebind_proc() nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_simple_bind_s("uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [7b23c6] connected to LDAP server ldap://172.16.54.31/ nslcd: [7b23c6] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [7b23c6] DEBUG: ldap_set_rebind_proc() nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_simple_bind_s("uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [7b23c6] connected to LDAP server ldap://172.16.54.31/ nslcd: [7b23c6] DEBUG: myldap_search(base="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(objectClass=posixAccount)") nslcd: [7b23c6] DEBUG: ldap_unbind() nslcd: [3c9869] DEBUG: connection from pid=15906 uid=0 gid=2000 nslcd: [3c9869] DEBUG: nslcd_pam_sess_o("jorge.suarez","uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es","su","/dev/pts/7","","jorge.suarez") It seems to me that it won't even try to look for groups. What I am doing wrong? I can't see anything relevant to my problem information on the docs. I'm probably not understanding how the map option works.

  Read the article

• Windows Experience Index could not be computed

  - by Alexey Ivanov

  I've upgraded recently from Windows Vista to Windows 8. When I try to rate my computer, it accesses DirectX 9 performance, then processes to DirectX 10 tests: And it gets stuck at this point. In 5–10 minutes, it shows error message: The video card is rather old: Mobile Intel 965 Express Chipset Family. I'm pretty sure it does not support DirectX 10. Why does Windows assess it with DirectX 10? And how can I make it skip DirectX 10 tests and get the system rating? The driver was installed automatically by Windows 8 from Windows Update. Version: 8.15.10.2697 Date: 10/01/2012

  Read the article

• HAProxy with 'backup' failure

  - by A.RG

  I have a simple configuration of 2 MySQL being load balanced by HAProxy. For an unfortunate reason I need to use them in Passive\Active mode. So I thought I'd configure one DB as 'backup' and go to sleep. But I was wrong. Whenever I add the 'backup' to the server line HAProxy throws a communication link error (essentially saying 'no DB available" (with the 'backup' it works great). It just doesnt consider that server as a valid option any more... I have tried this configuration: listen mysql 10.0.0.109:3307 mode tcp balance roundrobin option httpchk server db01 10.0.0.236:3306 server db02 10.0.0.68:3306 backup and also this configuration: frontend mysql_proxy bind 10.0.0.109:3307 default_backend mysql backend mysql mode tcp balance roundrobin option httpchk server db01 10.0.0.236:3306 server db02 10.0.0.68:3306 backup Nothing worked! Can anyone point me in the right direction? Thanks

  Read the article

• Ports do not open after rules appended in iptables

  - by user2699451

  I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

  Read the article

• Solution to route/proxy SNMP Traps (or Netflow, generic UDP, etc) for network monitoring?

  - by Christopher Cashell

  I'm implementing a network monitoring solution for a very large network (approximately 5000 network devices). We'd like to have all devices on our network send SNMP traps to a single box (technically this will probably be an HA pair of boxes) and then have that box pass the SNMP traps on to the real processing boxes. This will allow us to have multiple back-end boxes handling traps, and to distribute load among those back end boxes. One key feature that we need is the ability to forward the traps to a specific box depending on the source address of the trap. Any suggestions for the best way to handle this? Among the things we've considered are: Using snmptrapd to accept the traps, and have it pass them off to a custom written perl handler script to rewrite the trap and send it to the proper processing box Using some sort of load balancing software running on a Linux box to handle this (having some difficulty finding many load balancing programs that will handle UDP) Using a Load Balancing Appliance (F5, etc) Using IPTables on a Linux box to route the SNMP traps with NATing We've currently implemented and are testing the last solution, with a Linux box with IPTables configured to receive the traps, and then depending on the source address of the trap, rewrite it with a destination nat (DNAT) so the packet gets sent to the proper server. For example: # Range: 10.0.0.0/19 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.0.0/19 -j DNAT --to-destination 10.1.2.3 # Range: 10.0.33.0/21 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.33.0/21 -j DNAT --to-destination 10.1.2.3 # Range: 10.1.0.0/16 Site: xyz01 Destination: bar01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.1.0.0/16 -j DNAT --to-destination 10.3.2.1 This should work with excellent efficiency for basic trap routing, but it leaves us completely limited to what we can mach and filter on with IPTables, so we're concerned about flexibility for the future. Another feature that we'd really like, but isn't quite a "must have" is the ability to duplicate or mirror the UDP packets. Being able to take one incoming trap and route it to multiple destinations would be very useful. Has anyone tried any of the possible solutions above for SNMP traps (or Netflow, general UDP, etc) load balancing? Or can anyone think of any other alternatives to solve this?

  Read the article

• Postfix multiple checks

  - by xBlue

  I want to achieve the following with Postfix: Run all emails through a black list Allow any clients sending to a list of domains Allow some clients sending to any domain This is what I have: (postfix is on 10.0.8.0 and some of the senders are 10.0.8.0 and 10.0.9.0) mynetworks_style = subnet smtpd_recipient_restrictions = check_recipient_access sqlite:/etc/postfix/access-bl.query, check_client_access hash:/etc/postfix/trusted_clients, check_recipie nt_access hash:/etc/postfix/local_domains, reject_unauth_destination, permit So, right now the black list works. File /etc/postfix/trusted_clients contains who can send anywhere (3), file /etc/postfix/local_domains contains where you can send (2). Those two are fine, they return properly. My problem is getting all three working together. Not sure if it's an ordering issue. Currently sending a test from 10.0.9.17 and I get Relay access denied. If I add: mynetworks = 10.0.8.0/24 10.0.9.0/24 then anyone can send anywhere, so #2 is not working. Postfix version is 2.10 on Ubuntu 14.04. Any ideas?

  Read the article

• How does Windows Remote Desktop Connection Work?

  - by Devoted

  How does Windows Remote Desktop connection work? An IP address is used to connect to the computer but....how can that IP be accessed from anywhere? If, for example, the IP address is 128.10.10.10, there MUST be another 128.10.10.10 somewhere else in the world. How does Remote Desktop know which one to connect to? Thanks so much EDIT: Thank you! Answers cleared this up quite a bit. But if my remote desktop connection suddenly stopped working and I didn't change anything, how do I even start to diagnose what may be the problem? I can remote connect to it from a LAN computer though...

  Read the article

• How do I configure a secondary gateway in RHEL5?

  - by Brett Ryan

  Greetings, we have been experiencing a random timeout issue with VPN users connecting to one of our servers which is causing a problem. My network administrator has instructed me to configure a secondary gateway to include the VPN connection. My current connection resides as follows, 10.1.9.1 is the internal gateway to the internet, I'd like to add 10.1.1.20 as the VPN gateway. # Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet DEVICE=eth0 BOOTPROTO=none BROADCAST=10.1.255.255 IPADDR=10.1.1.22 IPV6_AUTOCONF=yes NETMASK=255.255.0.0 NETWORK=10.1.0.0 ONBOOT=yes GATEWAY=10.1.9.1 TYPE=Ethernet USERCTL=no IPV6INIT=no PEERDNS=yes

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >